The gasket set is for rooms exposed to moisture. In order to water-insulate the surfaces on which ceramic plates will be laid, it is recommended in spaces requiring high-level waterproof protection due to increased moisture (e.g. in showers, bathrooms, toilets, laundries, kitchens etc.). Water insulation may be used on any type of surface: gypsum-board walls, plastered walls, walls made of gas-concrete blocks, wood-based materials, old ceramic facings, old stone facings, etc.
The liquid film is a ready-to-use, single-component and solvent-free sealant.
It consists of polymeric dispersion fillers and modifying additives. After application and conjunction arises a waterproof coat. The waterproof foil is especially suitable for rooms with high moisture, such as bathrooms, kitchens or laundries. It is also suitable for moisture insulation under panels and floor coverings made of ceramic, glaze, terracotta, wood, laminate and synthetic materials.
The primer is appropriated for absorptive and porous surfaces, inside and outside.
Especially for cement-limestone plaster, cellular concrete, plaster boards and cement plaster.
The product has a high penetration ability and is absorbed in the substrate, thus strengthening it but with a breathable effect. Hereby the surface ́s structure is improved. The primer improves the surface adhesion of the materials, which are used on the primed surface. Due to the reduced absorption capacity of the surface, the consumption of the coating material, emulsion paints, adhesives, as well as the mineral spatula is downsized.
On the basis of the biocide and fungicide, contained in the solvent, the primed substrate is protected against mold and bacteria.